What is the typical ground snow load in Utah?

Typical lowland ground snow loads in Utah run from about 25 to 50 PSF for planning purposes. Actual jurisdictional values vary by county and elevation — always verify with your local building department.

Do all Utah counties use the same snow load?

No. Counties commonly adopt different design snow load values based on local snow history and elevation. In Utah, mountain and high-elevation jurisdictions can require case-study design snow loads up to 300 PSF or more. Confirm the value used on your permit set.

Do steel buildings in Utah need special snow engineering?

Every North Point Steel steel structure ships with sealed engineering for the permit jurisdiction, sized for local snow, wind, seismic, and code requirements.

Does roof pitch matter in Utah?

Yes. Steeper pitches shed snow more easily and reduce the ASCE 7 slope factor on smooth, cold metal roofs. Drift, slide loads onto porches, and unbalanced loads still need to be checked by the engineer.

Is this an official code value for Utah?

No. This is a planning-level reference only. Official design snow load comes from ASCE 7 and the code adopted by the local building department.

Snow Load Reference · UT

Utah Snow Loads

Typical ground snow load in Utah: 25–50 PSF for planning. Actual design values are set by your local jurisdiction and confirmed by a licensed engineer.

Planning and educational reference only. Verify final design snow loads with your building manufacturer, engineer of record, and local building department.

Typical Ground Snow Load

25–50 PSF

High · 30–50 PSF

Regional considerations

Wasatch Front cities typically 30–43 PSF. Ski country (Park City, Alta, Snowbird) requires case-study loads that regularly exceed 200 PSF.

Mountain / high-elevation zones in Utah can require design snow loads up to 300 PSF — verify with the local jurisdiction before final design.

Designing a steel building in Utah

Roof framing: purlin spacing and rafter depth sized to the jurisdictional design snow load, not a rule of thumb.
Drift & unbalanced loads: checked against parapets, adjacent rooflines, and rooftop equipment.
Snow slide: smooth steel panels shed snow — slide loads onto porches, lean-tos, and adjacent buildings are part of the design.
Foundations: snow-driven column reactions size piers, anchor bolts, and slab reinforcement.

FREE CONSULTATION • NO PRESSURE • NO OBLIGATION

Let's talk about building in Utah.

Every great building starts with the right plan. Tell us about your project, and we'll review your goals, answer your questions, and prepare a customized building quote based on your specific needs—not a one-size-fits-all estimate.

From planning and permitting to engineering and direct manufacturer coordination, we're here to help you make informed decisions before steel is ever ordered.

Honest guidance
Transparent pricing
Direct manufacturer coordination
Planning and permitting support

First nameLast namePhoneEmail

ZIP codeStateTimeline

Building typeSize

By submitting, you agree to be contacted by phone, email, or text about your project. We never share your info with third parties.

Utah Snow Load FAQs

Other states

← Back to Snow Load Reference

Planning reference only — not an official code value. Confirm final design snow loads with your building manufacturer, engineer of record, and the Utah permitting authority.